Coated steel sheet

ICL item no. 82

A tariff rate quota for certain coated steel sheet goods that are classified under tariff item 7210.30.00, 7210.41.00, 7210.49.00, 7210.90.00, 7212.20, 7212.30.00, 7225.30.00, 7225.91.00, 7225.92.00, and 7226.99.00 in the List of Tariff Provisions set out in the schedule to the Customs Tariff.

Items subject to the tariff rate quota 

HS codes	Commodity codes	Description	Unit of measure
72.10		Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.
7210.30.00.00	7210.30.00.00.0001	- Electrolytically plated or coated with zinc	KGM
		Otherwise plated or coated with zinc
7210.41.00.00	7210.41.00.00.0001	- Corrugated	KGM
7210.49.00		Other
7210.49.00.40	7210.49.00.40.0001	- Of a thickness less than 0.25 mm	KGM
7210.49.00.50	7210.49.00.50.0001	- Of a thickness of 0.25 mm or more but less than 0.5 mm	KGM
7210.49.00.60	7210.49.00.60.0001	- Of a thickness of 0.5 mm or more but not exceeding 1 mm	KGM
7210.49.00.70	7210.49.00.70.0001	- Of a thickness exceeding 1 mm	KGM
7210.90.00.00	7210.90.00.00.0001	- Other	KGM
72.12		Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated.
7212.20.00		Electrolytically plated or coated with zinc
7212.20.00.10	7212.20.10.00.0001	- Of a thickness less than 0.25 mm	KGM
7212.20.00.20	7212.20.20.00.0001	- Of a thickness of 0.25 mm or more but less than 0.5 mm	KGM
7212.20.00.30	7212.20.30.00.0001	- Of a thickness of 0.5 mm or more but not exceeding 1 mm	KGM
7212.20.00.40	7212.20.40.00.0001	- Of a thickness exceeding 1 mm	KGM
7212.30.00		Otherwise plated or coated with zinc
7212.30.00.10	7212.30.00.10.0001	- Of a thickness less than 0.25 mm	KGM
7212.30.00.20	7212.30.00.20.0001	- Of a thickness of 0.25 mm or more but less than 0.5 mm	KGM
7212.30.00.30	7212.30.00.30.0001	- Of a thickness of 0.5 mm or more but not exceeding 1 mm	KGM
7212.30.00.40	7212.30.00.40.0001	- Of a thickness exceeding 1 mm	KGM
72.25		Flat-rolled products of other alloy steel, of a width of 600 mm or more.
7225.30.00.00	7225.30.00.00.0001	- Other, not further worked than hot-rolled, in coils	KGM
		Other
7225.91.00		Electrolytically plated or coated with zinc
7225.91.00.10	7225.91.00.10.0001	- Of a thickness of less than 0.25 mm	KGM
7225.91.00.20	7225.91.00.20.0001	- Of a thickness of 0.25 mm or more but less than 0.5 mm	KGM
7225.91.00.30	7225.91.00.30.0001	- Of a thickness of 0.5 mm or more but not exceeding 1 mm	KGM
7225.91.00.40	7225.91.00.40.0001	- Of a thickness exceeding 1 mm	KGM
7225.92.00		Otherwise plated or coated with zinc
7225.92.00.10	7225.92.00.10.0001	- Of a thickness less than 0.25 mm	KGM
7225.92.00.20	7225.92.00.20.0001	- Of a thickness of 0.25 mm or more but less than 0.5 mm	KGM
7225.92.00.30	7225.92.00.30.0001	- Of a thickness of 0.5 mm or more but not exceeding 1 mm	KGM
7225.92.00.40	7225.92.00.40.0001	- Of a thickness exceeding 1 mm	KGM
72.26		Flat-rolled products of other alloy steel, of a width of less than 600 mm.
7226.99.00		Other
		Plated or coated with zinc
7226.99.00.11	7226.99.00.11.0001	- Of a thickness of less than 0.25 mm	KGM
7226.99.00.12	7226.99.00.12.0001	- Of a thickness of 0.25 mm or more but less than 0.5 mm	KGM
7226.99.00.13	7226.99.00.13.0001	- Of a thickness of 0.5 mm or more but not exceeding 1 mm	KGM
7226.99.00.19	7226.99.00.19.0001	- Of a thickness exceeding 1 mm	KGM
		Other
7226.99.00.91	7226.99.00.91.0001	- Of a thickness of less than 0.25 mm	KGM
7226.99.00.92	7226.99.00.92.0001	- Of a thickness of 0.25 mm or more but less than 0.5 mm	KGM
7226.99.00.93	7226.99.00.93.0001	- Of a thickness of 0.5 mm or more but not exceeding 1 mm	KGM
7226.99.00.99	7226.99.00.99.0001	- Of a thickness exceeding 1 mm	KGM