Structural steel

ICL item no. 82

A tariff rate quota for certain structural steel goods that are classified under tariff item 7216.10.00, 7216.21.00, 7216.22.00, 7216.31.00, 7216.40.00, 7216.50.00, 7216.61.00, 7216.69.00, 7216.91.00, 7216.99.00, and 7228.70.00 in the List of Tariff Provisions set out in the schedule to the Customs Tariff. 

Items subject to tariff rate quota 

HS codes	Commodity codes	Description	Unit of measure
72.16		Angles, shapes and sections of iron or non-alloy steel
7216.10.00		U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
		U sections
7216.10.00.11	7216.10.00.11.0001	- American standard	KGM
7216.10.00.19	7216.10.00.19.0001	- Other	KGM
		I sections
7216.10.00.21	7216.10.00.21.0001	- American standard	KGM
7216.10.00.29	7216.10.00.29.0001	- Other	KGM
7216.21.00		L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
		L sections
7216.21.00.10	7216.21.00.10.0001	- Equal legs	KGM
7216.21.00.20	7216.21.00.20.0001	- Unequal legs	KGM
7216.22.00.00	7216.22.00.00.0001	- T sections	KGM
		U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.31.00		U sections
		Of a height of 80 mm or more but not exceeding 152.4 mm
7216.31.00.11	7216.31.00.11.0001	- American standard	KGM
7216.31.00.12	7216.31.00.12.0001	- For motor vehicles	KGM
7216.31.00.19	7216.31.00.19.0001	- Other	KGM
		Of a height exceeding 152.4 mm
7216.31.00.21	7216.31.00.21.0001	- American standard	KGM
7216.31.00.22	7216.31.00.22.0001	- For motor vehicles	KGM
7216.31.00.29	7216.31.00.29.0001	- Other	KGM
7216.40.00		L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
		L sections, equal legs
7216.40.00.11	7216.40.00.11.0001	- Of a height of 80 mm or more but not exceeding 152.4 mm	KGM
7216.40.00.12	7216.40.00.12.0001	- Of a height exceeding 152.4 mm	KGM
		L sections, unequal legs
7216.40.00.21	7216.40.00.21.0001	- Large leg, of a height of 80 mm or more but not exceeding 152.4 mm	KGM
7216.40.00.22	7216.40.00.22.0001	- Large leg, of a height exceeding 152.4 mm	KGM
7216.40.00.30	7216.40.00.30.0001	- T sections	KGM
7216.50.00		Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216.50.00.10	7216.50.00.10.0001	- For use in ships, boats or floating structures	KGM
7216.50.00.20	7216.50.00.20.0001	- Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers	KGM
7216.50.00.30	7216.50.00.30.0001	- Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles	KGM
7216.50.00.90	7216.50.00.90.0001	- Other	KGM
7216.61.00		Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216.61.00.00	7216.61.00.00.0001	- Obtained from flat-rolled products	KGM
7216.69.00.00	7216.69.00.00.0001	- Other	KGM
7216.91.00		Other
		Cold-formed or cold-finished from flat-rolled products
7216.91.00.10	7216.91.00.10.0001	- L sections	KGM
7216.99.00		Other
7216.99.00.10	7216.99.00.10.0001	- L sections	KGM
7216.99.00.20	7216.99.00.20.0001	- I or H sections	KGM
7216.99.00.30	7216.99.00.30.0001	- U sections	KGM
		Other
7216.99.00.99	7216.99.00.99.0001	- Other	KGM
72.28		Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228.70.00		Angles, shapes and sections
		L sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
7228.70.00.11	7228.70.00.11.0001	- Equal legs	KGM
7228.70.00.12	7228.70.00.12.0001	- Unequal legs	KGM
7228.70.00.50	7228.70.00.50.0001	- U sections, not further worked than hot-rolled, cold-rolled, drawn or extruded	KGM
		Other shapes or sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
7228.70.00.82	7228.70.00.82.0001	- Curved grader blade sections	KGM
7228.70.00.83	7228.70.00.83.0001	- Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles	KGM
7228.70.00.89	7228.70.00.89.0001	- Other	KGM
		Other
7228.70.00.91	7228.70.00.91.0001	- L sections	KGM
7228.70.00.93	7228.70.00.93.0001	- U sections	KGM
7228.70.00.99	7228.70.00.99.0001	- Other	KGM